Bollard, Car Scanner

Inspection: All Reliance Foundry products should receive routine inspection and cleaning
every 6 months. To avoid progression of damage, identify and address problems as early as
possible. Loose or missing parts should be tightened or replaced immediately. Some environments
— including high-saline locations subject to saltwater spray or de-icing salts, or
high-traffic areas with abundant particulates or other pollutants — will require more
frequent attention.
Cleaning: Routine cleaning with soap and water is usually sufficient to maintain Reliance
Foundry products. Use a soft nylon brush to remove any accumulated dirt. Wash with mild
soap or detergent, then rinse in clean water and wipe dry with a soft cloth. Neglected or damaged
products may require additional care. Refer to Stainless Steel Care and Maintenance
and Powder Coating Care , Bollard Maintenance.
Heavily damaged products: Heavy damage includes structural compromises such as visible
dents, cracks, breaks and rust that can undermine the integrity of a product. Heavily damaged
products should be removed from service until a repair or replacement can be made.
To prevent worsening of damage, any significant rust should be removed as soon as possible.
If any parts are broken or missing, contact Reliance Foundry’s Sales Department to
determine the